2021 Globe Trailers 50-55 Ton Lowboys Paver 50LB470165

Information

2021 Globe Trailers 50-55 Ton Lowboys Paver 50LB470165

All Globe Trailers are 100% powder coat finished. The entire process takes place at Globe’s manufacturing facility. This eliminates the possibility of contamination occurring in transit between process phases. The process starts with sandblasting the trailer to near white, preheating the trailer steel in a dedicated, gas fired oven to optimum bonding temperature and applying an electrostatically charged zinc rich primer. The trailer then goes back in the oven to allow the primer to bond. After the primer has bonded, a top coat chosen from one of Globe Trailers’ 188 color options is applied before once more going back in the oven to cure. The result is a durable, easily cleaned finish that protects the trailer from corrosion and ensures a long service life.

Features may include:
  • Constructed with T-1 100k PSI yield High Quality Steel
  • 10 Year Structural Warranty On All Lowboys
  • Added Security
  • 5 years STEMCO Wheel Warranty.
  • Color Coded Hoses
  • Air Bags
  • V-Style Guide
  • Centrally Located Fittings
  • 22" Deck Height

Photos

Highlights

  • Brandywine, Maryland
  • 2021
  • Globe Trailers
  • 50-55 Ton Lowboys Paver 50LB470165
  • Main: 16” T-1 Steel | Rear Deck: 16” T-1 Steel
  • Centers: 40” Standard | Side Rails: 16” T-1 Steel | Crossmembers: 10” & 4” | Outriggers: Removable Standard | Front Ramps: Wood Filled, 22” X 41” | Riser: 3:1 Ratio on Riser 54” Transition | Rear Well Style: Level - Flush Across Rear Deck
  • Available
  • 5th Wheel: 50” | Ride: 5-Position

Specifications

  • 2021
  • Globe Trailers
  • 50-55 Ton Lowboys Paver
  • 50LB470165
  • Lowboy
  • Axle Spacing: 49”
  • Gooseneck: 12’ 2” | Lower Deck: 24’ | Rear Deck: 15’ 9“
  • 5th Wheel: 50” | Ride: 5-Position
  • Lower: 22” loaded | Rear: 43”
  • 51’ 9”
  • 8’ 6”
  • 6”
  • 16” | Style: Fixed
  • 100,000 lbs. in 12'
  • 25,000 lbs.
  • Centers: 40” Standard | Side Rails: 16” T-1 Steel | Crossmembers: 10” & 4” | Outriggers: Removable Standard | Front Ramps: Wood Filled, 22” X 41” | Riser: 3:1 Ratio on Riser 54” Transition | Rear Well Style: Level - Flush Across Rear Deck
  • 3
  • Main: 16” T-1 Steel | Rear Deck: 16” T-1 Steel
  • Clearance: 98”
  • 7 Way Connector
  • LED Plus 2 - Rear Strobes
  • 13 HP Engine
  • Wet Line Kit - Wing Nut Connection
  • Air Ride: - 25K, Auto Dump
  • 255/70R x 22.5 "H"
  • 8.25” x 22.5” Hub Piloted Steel
  • 16 1/2" x 7" - 25K | ABS: 4S2M
  • Axle 1: Fixed Type 30/30 ABS | Axle 2: Fixed Type 30/30 ABS | Axle 3: Super Lift Type 30 Non-ABS | D-Rings (Main Deck): 12 each side | Sandblast & Powder Coat | Mud Flaps & Reflective Tape | Flag Holders
  • Main: 1.75” Apitong Full Width | Wheel Covers: Apitong Covered | Well Decking: Apitong Covered