2021 Globe Trailers 50-55 Ton Lowboys Standard 50LB816825

Information

2021 Globe Trailers 50-55 Ton Lowboys Standard 50LB816825

All Globe Trailers are 100% powder coat finished. The entire process takes place at Globe’s manufacturing facility. This eliminates the possibility of contamination occurring in transit between process phases. The process starts with sandblasting the trailer to near white, preheating the trailer steel in a dedicated, gas fired oven to optimum bonding temperature and applying an electrostatically charged zinc rich primer. The trailer then goes back in the oven to allow the primer to bond. After the primer has bonded, a top coat chosen from one of Globe Trailers’ 188 color options is applied before once more going back in the oven to cure. The result is a durable, easily cleaned finish that protects the trailer from corrosion and ensures a long service life.

Photos

Highlights

  • Brandywine, Maryland
  • 2021
  • Globe Trailers
  • 50-55 Ton Lowboys Standard 50LB816825
  • Main: 16” T-1 Steel | Rear Deck: 16” T-1 Steel
  • Centers: 40" | Side Rails:16" T-1 Steel | Crossmembers: 10" & 4" | Outriggers: Removable Standard | Front Ramps: Steel, 18” x 31” Standard | Riser: 35° Rear Bridge Ramp | Rear Well Style: Boom & Bucket Well
  • Available
  • 5th Wheel: 50" | Ride: 5-Position

Specifications

  • 2021
  • Globe Trailers
  • 50-55 Ton Lowboys Standard
  • 50LB816825
  • Lowboy
  • Axle Spacing: 54”
  • Gooseneck: 12' 3" | Lower Deck: 26' | Rear Deck: 14' 7"
  • 5th Wheel: 50" | Ride: 5-Position
  • Lower: 22" Loaded | Rear: 42 5/8"
  • 52' 10"
  • 8’ 6”
  • 6”
  • 16” | Style: Fixed
  • 100,000 lbs. in 12'
  • 25,000 lbs.
  • Centers: 40" | Side Rails:16" T-1 Steel | Crossmembers: 10" & 4" | Outriggers: Removable Standard | Front Ramps: Steel, 18” x 31” Standard | Riser: 35° Rear Bridge Ramp | Rear Well Style: Boom & Bucket Well
  • 3
  • Main: 16” T-1 Steel | Rear Deck: 16” T-1 Steel
  • Clearance: 102”
  • 7 Way Connector
  • LED Plus 2 - Rear Strobes
  • 13 HP Honda Gas
  • Wet Line Kit - Wing Nut Connection
  • Air Ride: - 25K
  • 255/70R x 22.5 "H"
  • 8.25” x 22.5” Hub Piloted All Aluminum
  • 16 1/2" x 7" - 25K | ABS: 2S1M
  • Axle 1: Fixed Type 30/30 Non-ABS | Axle 2: Fixed Type 30/30 ABS | Axle 3: Super Lift Type 30 Non-ABS | D-Rings (Main Deck): 12 each side | Sandblast & Powder Coat | Mud Flaps & Reflective Tape | Flag Holders
  • Main: 1.75” Apitong - Open Center | Wheel Covers: Steel Covered S-Plate | Well Decking: Removable S-Plate - Full Length