2021 Globe Trailers Extendables 55LBE317612

Information

2021 Globe Trailers Extendables 55LBE317612

All Globe Trailers are 100% powder coat finished. The entire process takes place at Globe’s manufacturing facility. This eliminates the possibility of contamination occurring in transit between process phases. The process starts with sandblasting the trailer to near white, preheating the trailer steel in a dedicated, gas fired oven to optimum bonding temperature and applying an electrostatically charged zinc rich primer. The trailer then goes back in the oven to allow the primer to bond. After the primer has bonded, a top coat chosen from one of Globe Trailers’ 188 color options is applied before once more going back in the oven to cure. The result is a durable, easily cleaned finish that protects the trailer from corrosion and ensures a long service life.

Photos

Highlights

  • Brandywine, Maryland
  • 2021
  • Globe Trailers
  • Extendables 55LBE317612
  • Main: 16" T-1 Steel Std | Rear Deck: 16" T-1 Steel Std
  • Centers: 41" Std | Side Rails: 16" T-1 Steel | Crossmembers: 10" | Outriggers: Full Height Removable | Front Ramps: Steel, 18” X 31” Standard | Riser: 35° Rear Bridge Ramp | Rear Well Style: Boom & Bucket Well
  • Available
  • 5th Wheel: 50" | Ride: 5-Position

Specifications

  • 2021
  • Globe Trailers
  • Extendables
  • 55LBE317612
  • Lowboy
  • Axle Spacing: 60"
  • Gooseneck: 10' 111/2" | Lower Deck: 30' | Rear Deck: 15' 10"
  • 5th Wheel: 50" | Ride: 5-Position
  • Lower: 24" | Rear: 42"
  • 51’ 5 1/2"
  • 8’ 6”
  • Clearance: 86”
  • 8"
  • 16" | Style: Removable
  • 25,000 lbs.
  • Centers: 41" Std | Side Rails: 16" T-1 Steel | Crossmembers: 10" | Outriggers: Full Height Removable | Front Ramps: Steel, 18” X 31” Standard | Riser: 35° Rear Bridge Ramp | Rear Well Style: Boom & Bucket Well
  • 2+1
  • Main: 16" T-1 Steel Std | Rear Deck: 16" T-1 Steel Std
  • 7 Way Connector
  • LED Plus 2 - Rear Strobes
  • Wet Line Kit - Wing Nut Connection
  • 13 HP Honda - Gas
  • Air Ride: - 25K
  • 275/70R x 22.5 "H"
  • 8.25 x 22.5 Hub Piloted Steel
  • 16 1/2" x 7" - 25K
  • Axle 1: Fixed Type 30/30 Non-ABS | Axle 2: Type 30/30 Non-ABS | Axle 3: Hydraulic Flip Type 30 Non-ABS | D-Rings (Main Deck): 14 Ea Side | Sandblast & Powder Coat | Mud Flaps & Reflective Tape | Flag Holders
  • Main: 1.75" Apitong Full width | Wheel Covers: Steel Covered D-Plate | Well Decking: Open