2021 Globe Trailers Extendables 60LB830435

Information

2021 Globe Trailers Extendables 60LB830435

All Globe Trailers are 100% powder coat finished. The entire process takes place at Globe’s manufacturing facility. This eliminates the possibility of contamination occurring in transit between process phases. The process starts with sandblasting the trailer to near white, preheating the trailer steel in a dedicated, gas fired oven to optimum bonding temperature and applying an electrostatically charged zinc rich primer. The trailer then goes back in the oven to allow the primer to bond. After the primer has bonded, a top coat chosen from one of Globe Trailers’ 188 color options is applied before once more going back in the oven to cure. The result is a durable, easily cleaned finish that protects the trailer from corrosion and ensures a long service life.

Features may include:
  • Globe Trailer’S 10 Year Structural Warranty On All Lowboys
  • Constructed With T-1 100K Psi Yield High Quality Steel
  • 22” Deck Height
  • Centrally Located Fittings
  • V-Style Guide
  • Stinger
  • Air Bags
  • Decking Oak
  • 5 years STEMCO Wheel Warranty
  • Bumper Lifting D-Rings
  • Centrally Located Fittings
  • Multi Position Ride Height
  • 12” Cross Member Spacing

Photos

Highlights

  • Brandywine, Maryland
  • 2021
  • Globe Trailers
  • Extendables 60LB830435
  • Main: 16” T-1 Steel Std | Rear Deck: 16” T-1 Steel Std
  • Centers: 35" Std | Side Rails: 16" T-1 Steel | Crossmembers: 10" & 4" | Outriggers: Full Height Removable | Front Ramps: Steel, 18”X31” Standard | Riser: 35° Rear Bridge Ramp | Rear Well Style: Boom & Bucket Well
  • Available
  • 5th Wheel: 50" | Ride: 5 - Position

Specifications

  • 2021
  • Globe Trailers
  • Extendables
  • 60LB830435
  • Lowboy
  • Axle Spacing: 54"
  • Gooseneck: 10' 11" | Lower Deck: 24’ | Rear Deck: 14' 6"
  • 5th Wheel: 50" | Ride: 5 - Position
  • Lower: 22" Loaded | Rear: 42"
  • 49' 5"
  • 8'
  • 6"
  • 16” | Style: Removable
  • Clearance: 86"
  • 25,000 lbs.
  • Centers: 35" Std | Side Rails: 16" T-1 Steel | Crossmembers: 10" & 4" | Outriggers: Full Height Removable | Front Ramps: Steel, 18”X31” Standard | Riser: 35° Rear Bridge Ramp | Rear Well Style: Boom & Bucket Well
  • 3
  • Main: 16” T-1 Steel Std | Rear Deck: 16” T-1 Steel Std
  • 7 Way Connector
  • LED Plus 2 - Rear Strobes
  • Wet Line Kit - Quick Coupler Connection | 13 HP Pony Motor
  • Air Ride: - 25K
  • 275/70R x 22.5 "H"
  • 8.25 x 22.5 Steel
  • 16 1/2" x 7" - 25K | ABS: 2S1M
  • Axle 1: Fixed Type 30/30 Non-ABS | Axle 2: Fixed Type 30/30 ABS | Axle 3: Lift Type 30/30 Non-ABS | D-Rings (Main Deck): 9 Ea Side | Sandblast & Powder Coat | Mud Flaps & Reflective Tape | Flag Holders
  • Main: 2" Apitong outriggers with spring holders | Wheel Covers: Steel Cover D-Plate