2021 Globe Trailers 40-50 Ton Hydraulic Tail 40HT150713

Information

2021 Globe Trailers 40-50 Ton Hydraulic Tail 40HT150713

All Globe Trailers are 100% powder coat finished. The entire process takes place at Globe’s manufacturing facility. This eliminates the possibility of contamination occurring in transit between process phases. The process starts with sandblasting the trailer to near white, preheating the trailer steel in a dedicated, gas fired oven to optimum bonding temperature and applying an electrostatically charged zinc rich primer. The trailer then goes back in the oven to allow the primer to bond. After the primer has bonded, a top coat chosen from one of Globe Trailers’ 188 color options is applied before once more going back in the oven to cure. The result is a durable, easily cleaned finish that protects the trailer from corrosion and ensures a long service life.

Features may include:
  • High Quality Steel
  • Hydraulic Tail
  • Winch System
  • Hydraulic Ramps
  • Key Holes for Tie Downs
  • Storage Compartment
  • Wheel Options Drop Deck Design
  • Head Rack
  • Decking Oak
  • 5 years STEMCO Wheel Warranty
  • Landing Gear
  • Winch Controls
  • Color Coded Hoses

Photos

Highlights

  • Brandywine, Maryland
  • 2021
  • Globe Trailers
  • 40-50 Ton Hydraulic Tail 40HT150713
  • Main: 20” fabricated I-Beam | Spacing: 12”
  • Crossmembers: 10” Loadwell | 4” Neck & Rear Deck
  • Available
  • Load well: 36” | 5th Wheel: 49”

Specifications

  • 2021
  • Globe Trailers
  • 40-50 Ton Hydraulic Tail
  • 40HT150713
  • Flatbed
  • Axle Spacing: 49” | Swing Clearance: 86"
  • Gooseneck: 9’ | Load well: 31’
  • Load well: 36” | 5th Wheel: 49”
  • 48’
  • 8’ 6”
  • 16” | Style: Fixed
  • 25,000 lbs.
  • 20,850 ± lbs.
  • Crossmembers: 10” Loadwell | 4” Neck & Rear Deck
  • Main: 20” fabricated I-Beam | Spacing: 12”
  • 2
  • 7 Way SAE Connector
  • LED Plus 2 - Rear Strobes
  • Tail: 8’ | Wet-line setup for tractor
  • 27 HP Honda engine
  • Air ride | Auto Dump
  • 235/75R X 17.5 “H”
  • 6.75 X 17.5 Hub piloted steel disc wheels
  • 12 1/4 X 7 1/2 | ABS: 4S2M
  • Axle 1: Fixed Type 30/30 Non-ABS | Axle 2: Fixed Type 30/30 Non-ABS | Flip Under Ramp: 4’ | D-Rings: 11 per side | SandBlasted and Powder Coat | Mud Flaps & Reflective Tape | Flag Holders
  • Main : 1.375” Apitong flooring