2021 Globe Trailers 40-55 Ton Sliding Axle 40SA426787

Information

2021 Globe Trailers 40-55 Ton Sliding Axle 40SA426787

All Globe Trailers are 100% powder coat finished. The entire process takes place at Globe’s manufacturing facility. This eliminates the possibility of contamination occurring in transit between process phases. The process starts with sandblasting the trailer to near white, preheating the trailer steel in a dedicated, gas fired oven to optimum bonding temperature and applying an electrostatically charged zinc rich primer. The trailer then goes back in the oven to allow the primer to bond. After the primer has bonded, a top coat chosen from one of Globe Trailers’ 188 color options is applied before once more going back in the oven to cure. The result is a durable, easily cleaned finish that protects the trailer from corrosion and ensures a long service life.

Features may include:
  • Winch System
  • Sliding Axle
  • Constructed with T-1 100K PSI yield High Quality Steel
  • Decking Oak
  • Key Holes for Tie Downs
  • Hydraulic Controls
  • Air Bags
  • Storage Compartment
  • Pony Motor

Photos

Highlights

  • Brandywine, Maryland
  • 2021
  • Globe Trailers
  • 40-55 Ton Sliding Axle 40SA426787
  • Main: 100,000 PSI Yield | Center: 34” apx.
  • Crossmembers: 4” and 3” JR. I-beam on 8” centers
  • Available
  • 5th Wheel: 46”

Specifications

  • 2021
  • Globe Trailers
  • 40-55 Ton Sliding Axle
  • 40SA426787
  • Flatbed
  • Axle Spacing: 50” | Swing Clearance: 80”
  • Lower Deck: 38’ 0” (458 3/4”) | Stake Pockets: 16”
  • 5th Wheel: 46”
  • Lower: 36”
  • 48’ 3” (579 3/16”)
  • 8’ 6” (102”)
  • 11”
  • 25,000 lbs.
  • Crossmembers: 4” and 3” JR. I-beam on 8” centers
  • 2
  • Main: 100,000 PSI Yield | Center: 34” apx.
  • 20” | Style: Fixed
  • 7 Way SAE Connector
  • LED Plus 2 - Rear Strobes
  • Wet line to truck with quick couplers
  • Air Ride Suspension, with Dump Valve | Two Speed Landing Gear
  • 235/75R X 17.5 “H”
  • 6.75 X 17.5 Hub Piloted Steel
  • 39’ 11” (478 15/16”)
  • 12 1/4” x 71/2” - 25K | ABS: 4S2M
  • Axle 1: Fixed Type 30/30 ABS | Axle 2: Fixed Type 30/30 ABS | Tool Boxes: Two (2) Lockable Tool boxes in upper deck | Sandblast & Powder Coat | Flag Holders
  • Main : 1 3/8” Apitong Flooring | Main Deck Center Slope Rollers | Load Angle : 6.5° | Dump Angle : 15°