2021 Globe Trailers 40-55 Ton Sliding Axle 440G-53

Information

2021 Globe Trailers 40-55 Ton Sliding Axle 440G-53

All Globe Trailers are 100% powder coat finished. The entire process takes place at Globe’s manufacturing facility. This eliminates the possibility of contamination occurring in transit between process phases. The process starts with sandblasting the trailer to near white, preheating the trailer steel in a dedicated, gas fired oven to optimum bonding temperature and applying an electrostatically charged zinc rich primer. The trailer then goes back in the oven to allow the primer to bond. After the primer has bonded, a top coat chosen from one of Globe Trailers’ 188 color options is applied before once more going back in the oven to cure. The result is a durable, easily cleaned finish that protects the trailer from corrosion and ensures a long service life.

Features may include:
  • Winch System
  • Sliding Axle
  • Constructed with T-1 100K PSI yield High Quality Steel
  • Decking Oak
  • Key Holes for Tie Downs
  • Hydraulic Controls
  • Air Bags
  • Storage Compartment
  • Pony Motor

Photos

Highlights

  • Brandywine, Maryland
  • 2021
  • Globe Trailers
  • 40-55 Ton Sliding Axle 440G-53
  • Main Frame: 100,000 PSI Yield | Center: 40” apx. |Crossmembers: 3” Junior I-Beam on 8” Centers
  • Crossmembers: 3” Junior I-Beam on 8” Centers
  • Available
  • 5th Wheel: 46”

Specifications

  • 2021
  • Globe Trailers
  • 40-55 Ton Sliding Axle
  • 440G-53
  • Flatbed
  • Axle Spacing: 50” | Swing Clearance: 80”
  • 53’ (636”)
  • 8’ 6” (102”)
  • Lower Deck: 43’ 1” (517”)
  • 5th Wheel: 46”
  • Lower: 37 1/2” Loaded
  • 12 1/2” Loaded
  • 16” | Style: Fixed
  • 25,000 lbs.
  • Approx: 19,610 ± lbs.
  • Crossmembers: 3” Junior I-Beam on 8” Centers
  • 2
  • Main Frame: 100,000 PSI Yield | Center: 40” apx. |Crossmembers: 3” Junior I-Beam on 8” Centers
  • LED Plus 2 - Rear Strobes
  • 7 Way SAE Connector
  • Wet line to truck with quick couplers
  • Air Ride Suspension
  • 235/75R X 17.5 “H”
  • 6.75 X 17.5 Hub Piloted Steel
  • 44’ 6” (534”)
  • 12 - 1/4” x 7 1/2” - 25K | ABS: 4S2M
  • Axle 1: Fixed Type 30/30 ABS | Axle 2: Fixed Type 30/30 ABS | Tool Boxes: Twin Side Mounted in Upper Deck with Lockable Doors | Sandblast & Powder Coat
  • Main : 1 3/8” Apitong | Load Angle : 6.5° | Dump Angle : 15°