Brandywine Trucks & Equipment

  • Route 301 & Route 5
  • Brandywine, MD 20613
  • Call Us: (301) 372-0083
  • //www.brandywine-eqp.com/
Print This Page

2021 Globe Trailers Drop Deck Trailer 40DP849127

Information

2021 Globe Trailers Drop Deck Trailer 40DP849127

All Globe Trailers are 100% powder coat finished. The entire process takes place at Globe’s manufacturing facility. This eliminates the possibility of contamination occurring in transit between process phases. The process starts with sandblasting the trailer to near white, preheating the trailer steel in a dedicated, gas fired oven to optimum bonding temperature and applying an electrostatically charged zinc rich primer. The trailer then goes back in the oven to allow the primer to bond. After the primer has bonded, a top coat chosen from one of Globe Trailers’ 188 color options is applied before once more going back in the oven to cure. The result is a durable, easily cleaned finish that protects the trailer from corrosion and ensures a long service life.

Photos

Highlights

  • Brandywine, Maryland
  • 2021
  • Globe Trailers
  • Drop Deck Trailer 40DP849127
  • Main: 16” Fabricated I-Beam
  • Centers: 36” Standard | Side Rails: 16” Fabricated I-Beam | Crossmembers: 10” & 4” | Outriggers: Removable Standard | Spacing: 12”
  • Available
  • 5th Wheel: 50”

Specifications

  • 2021
  • Globe Trailers
  • Drop Deck Trailer
  • 40DP849127
  • Drop Deck
  • Axle Spacing: 49” | Swing Clearance: 86” & 93” | Beavertail: 48”
  • Gooseneck: 11’ 3” | Lower Deck: 25’ | Rear Deck: 48”
  • 5th Wheel: 50”
  • Lower : 36” | Rear: 43”
  • 40’
  • 8’ 6”
  • 13 1/2”
  • 18” | Style: Fixed
  • Concentrated Load: 80,000 lbs.
  • 25,000 lbs.
  • Approx: 40,000 ± lbs.
  • Centers: 36” Standard | Side Rails: 16” Fabricated I-Beam | Crossmembers: 10” & 4” | Outriggers: Removable Standard | Spacing: 12”
  • 3
  • Main: 16” Fabricated I-Beam
  • 7 Way SAE Connector
  • LED Plus 2 - Rear Strobes
  • Spring Ride Suspension | 2-Speed Landing Gear
  • Sumitomo ST 727 10R17.5 “H”
  • 6.75 X 17.5 Hub Piloted Steel
  • 16 1/2" x 7" - 25K | ABS: 4S2M
  • Axle 1: Fixed Type 30/30 ABS | Axle 2: Fixed Type 30/30 ABS | Axle 3: Fixed Type 30/30 NON ABS | D-Rings: 12 Each side | Dual toolboxes in top deck similar to interstate design | Toolbox in beaver tail | Sandblast & Powder Coat | Mud Flaps & Reflective Tape | Flag Holders
  • Main: 2” Apitong | Wheel Covers: Steel Covered D-Plate