2021 Globe Trailers Drop Deck Trailer 50DP297301

Information

2021 Globe Trailers Drop Deck Trailer 50DP297301

All Globe Trailers are 100% powder coat finished. The entire process takes place at Globe’s manufacturing facility. This eliminates the possibility of contamination occurring in transit between process phases. The process starts with sandblasting the trailer to near white, preheating the trailer steel in a dedicated, gas fired oven to optimum bonding temperature and applying an electrostatically charged zinc rich primer. The trailer then goes back in the oven to allow the primer to bond. After the primer has bonded, a top coat chosen from one of Globe Trailers’ 188 color options is applied before once more going back in the oven to cure. The result is a durable, easily cleaned finish that protects the trailer from corrosion and ensures a long service life.

Photos

Highlights

  • Brandywine, Maryland
  • 2021
  • Globe Trailers
  • Drop Deck Trailer 50DP297301
  • Main: 100 KSI flanges and webs
  • Centers: 42” Standard | Side Rails: Structural Steel Channel | Crossmembers: Jr. I Beams on 12” Center
  • Available
  • 5th Wheel: 49”

Specifications

  • 2021
  • Globe Trailers
  • Drop Deck Trailer
  • 50DP297301
  • Drop Deck
  • Axle Spacing: 54” | Swing Clearance: 84”
  • Gooseneck: 10’ 10” | Lower Deck: 32’
  • 5th Wheel: 49”
  • Lower Deck: 40” | Rear Deck: 40”
  • 42’
  • 8’ 6”
  • 9”
  • 20” | Style: Fixed
  • 25,000 lbs.
  • Centers: 42” Standard | Side Rails: Structural Steel Channel | Crossmembers: Jr. I Beams on 12” Center
  • 3
  • Main: 100 KSI flanges and webs
  • 7 Way Connector
  • LED Plus 2 - Rear Strobes
  • Tri-Axle Spring Ride Suspension
  • 255/70R x 22.5 "H"
  • 8.25 x 22.5 Hub Piloted Steel
  • 16 1/2" x 7" - 25K | ABS: 4S2M
  • Axle 1: Fixed Type 30/30 NON ABS | Axle 2: Fixed Type 30/30 ABS | Axle 3: Fixed Type 30/30 ABS | D-Rings: 14 Per Side | Winches & Webbing: 14 | Sandblast & Powder Coat | Mud Flaps & Reflective Tape | Flag Holders
  • Main & Gooseneck: Steel smooth plate, 1/4” thick covering the entire deck surface. Allows for welding of four tank locator brackets